New underlayment
A new waterproof layer is installed slope to slope to protect the house for decades.
Tile Roofing
Tile Roof Replacement Secaucus, NJ
A roofer in Secaucus can replace a worn tile roof by removing the tile, repairing the deck, installing new underlayment and flashing, then relaying the sound tile or putting on new tile. One call to (551) 373-3020 reaches a nearby tile roofer.
On most tile roofs, what has worn out is not the tile but the underlayment, flashing and fasteners beneath it. Clay tile in particular can outlive two or three underlayments, so many replacements reuse the original tile over brand new layers. Tile that has weathered badly or broken in large numbers is replaced with new tile.
Either way, the job follows the same order. The tile comes off and is sorted, the old underlayment and battens are stripped, soft decking is replaced, and new underlayment, battens and flashing go down before tile is laid back on. A building permit is usually required, and the inspector may check the underlayment before tile goes back on.
No tile removal is perfectly clean. Old tile can crack when its fasteners are pulled, so matching spares are lined up before the job starts. It is worth asking how breakage is handled and how new tile will be blended in.
Tile Roof Replacement is often paired with tile roof installation and tile roof repair, depending on the cause.
Dealing with this in Secaucus, NJ right now? Call (551) 373-3020 to talk to a local roofer.
Call nowThe process
The tile roof replacement process
Done right, a replacement resets the clock on everything under the tile.
Decide on the tile
A close look at the tile, the underlayment and the decking decides whether the tile goes back on or new tile is ordered. Where the roof sags, the structure is checked before anyone goes up.
Strip the tile
Tile is pulled course by course, sorted and stacked on the roof or on pallets, with broken pieces set aside. Sections are opened only as fast as they can be dried in again.
Tear off old layers
The old underlayment, battens and rusted flashing come off down to the sheathing. Damaged sheathing is replaced and loose boards are renailed.
Dry in again
The roof is dried in with new underlayment and fitted with fresh flashing throughout. New battens and new bird stops go on before the tile.
Put tile back
The salvaged tile is relaid course by course with corrosion resistant fasteners, and new or salvaged tile fills any gaps. If new tile was chosen, it goes on the same way over the new layers.
Close the roof
Hip and ridge caps are reset, often on a dry ridge system with ventilation, and the site is cleared of broken tile and debris. The permit is closed with a final inspection where required.
What is included
What tile roof replacement includes
Deck repair
The bare deck is repaired where needed so the new roof has a solid base.
Tile salvage
Old tile is pulled and sorted so as much original tile as possible goes back up.
New tile
Salvaged tile is relaid with new fasteners over new battens and bird stops.
Valley metal
Valleys, walls, chimneys and pipes get new flashing sized for the tile profile.
Related service
Tile Roof Underlayment Replacement Secaucus, NJ
When only the underlayment has failed, the fix is to replace that layer and put the same tile back on. Older felt underlayment turns brittle in the heat trapped under tile and starts to split at laps and nail holes. Modern options like self-adhered membranes and heavy synthetics are built to last far longer.
In Secaucus, a roofer replacing tile underlayment typically works one slope at a time, stacking tile on the next section over. Flashing and battens are renewed along with the underlayment, because reusing tired metal defeats the purpose. The result is a roof that keeps its original look over a brand new waterproof layer.
Related service
Clay Tile Roof Replacement Secaucus, NJ
With clay tile, the first question is whether the tile itself still has life left. Tile that is flaking or crumbling from freeze damage is replaced, and the rest is relaid. If too much tile has failed, new clay in a close profile and color can replace it.
On older Secaucus homes with clay tile, keeping the original tile or matching it closely preserves the character of the house. Salvaged clay and careful placement let the finished roof look like it was never touched.
Local help
Tile Roof Replacement Near Me
Many tile roofs in Secaucus were installed decades ago, and a lot of them are reaching the age when the original underlayment gives out. From Secaucus to surrounding communities such as Union City, East Rutherford, West New York and North Arlington, the choice between relaying and new tile depends on the tile type and how it has weathered, so a look under a few tiles is the first step in planning any replacement.
Need tile roof replacement around Secaucus? Call (551) 373-3020 for a Secaucus roofer who serves the towns around it too.
Roofs in this climate
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, which is how ice dams form and back water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. That is why roof repair in Secaucus is busiest after a hard winter and before the next one.
Why call
Why not wait
Drier ceilings
Small roof problems caught early usually stay small repairs.
Local knowledge
Local roofers see the same roofs and storm damage across Secaucus and nearby towns.
Know what happens next
Ask your questions before you agree to anything.
Common questions about tile roof replacement
Can a tile roof be replaced with shingles or metal?
Changing to another roofing material is an option many owners consider when tile has worn out. The eaves, flashing and ventilation are reworked for the new material, and local rules or an HOA may limit the choice.
Is it possible to reuse the existing tile?
Sound tile can be reused, and on many clay roofs most of it goes back on. Some pieces always break during removal, so matching replacement tile is blended in. Eroded concrete tile and spalled clay are the pieces that should not go back up.
When is a tile roof past repair?
Several leaks, widespread slipping and brittle underlayment point to replacement. One leak or a few broken tiles is repair work. Lifting a few tiles in different areas shows whether the problem is local or roof wide.
How long does a tile roof replacement take?
Plan on a longer project than a shingle roof, commonly one to a few weeks. Deck repairs, structural work and finding matching tile can extend it. Working slope by slope keeps the house dried in throughout.
What does relaying a tile roof mean?
A lift-and-relay means removing the tile, replacing the underlayment, battens and flashing beneath it, then putting the same tile back. It solves leaks caused by worn underlayment while keeping the look of the roof.
More questions? Call (551) 373-3020
Other services that may help
Tile Roof Installation
Clay and concrete tile roofs installed over the right underlayment, battens and flashing, so the tile and the layers under it age well together.
Learn moreTile Roof Repair
Fixing cracked, slipped and missing clay or concrete tiles, loose ridge caps and worn flashing, so the tile keeps shedding water the way it should.
Learn moreRoof Replacement
Replacing an aging roof with new underlayment, flashing, vents and roofing, built to current code from the decking out.
Learn moreTile Roof Inspection
A close look at the tile, underlayment, flashing, valleys and attic of a clay or concrete tile roof, before buying a home, after a storm or as the underlayment ages.
Learn more
Looking for something else?
See all roofing servicesNeed tile roof replacement in Secaucus, NJ?
Call (551) 373-3020 for a local roofer in Secaucus and nearby towns.